• Directions

    View Larger Map

    Brown's Marine

    42 Jack's Place Rd,

    Deltaville VA

    Tel: 804 776 6365

  • Contact Us

    Your Name (required)

    Your Email (required)

    Subject

    Your Message

    To help us eliminate spam mail please the answer the question
    3+1=? 

    Brown's Marine

    42 Jack's Place Rd,

    Deltaville VA

    Tel: 804 776 6365

  • Local Weather
    See links at the bottom of the page for Chesapeake Bay wind and tide forcasts

Author Archives: Admin

posted by

Categories: winterizing

Comments: 0

Thanks to all our loyal customers for their continued support. Special thanks this past month to Doug and Irv from the Chesapeake Bay Oyster Company for working with us to re-power one of their work boats. We really appreciate and value the local support and enjoy working with all our local businesses.

As fall arrives, we all must think ahead and prep for winterization and storage. We have helpful information in the dealership. Stop in for a free copy of Yamaha’s “Maintenance Matters” and our own “Boating Accessories Catalog” — both are full of great information and products.

Some quick reminders to consider:

Protect from freezing — anywhere water can collect is obviously a problem. Use common sense and drain freshwater tanks or protect with proper antifreeze. Check all compartments and make sure they can drain. When the boat is hauled and blocked or on the trailer, remove the drain plug from the boat.

Take care of your engine — Inboard/Outboards will freeze. If yours is freshwater cooled, make sure the antifreeze is at proper strength. A raw water engine should be flushed and protected with antifreeze or at minimum drained of any water. Outboards should be stored vertically if possible as water will drain from the power head.

Don’t forget your fuel system — We see more fuel related problems than any other issue. Most manufactures today recommend removing fuel from the tank if possible. Others suggest filling the tank 7/8-full and adding the proper amount of fuel stabilizer. Do not fill the tank completely, it’s important to allow for expansion and contraction from variations in temperature. Even with stabilizer today’s fuels do not have a great shelf life, this is especially true when the fuel sits in small areas like a carburetor. In this environment, small volume, exposure to air and temperature variation fuel will break down rapidly.

We stock winterizing products from Yamaha, Honda, BRP, Suzuki and many aftermarket suppliers. Items like Yamaha Ring Free, Yamaha Fogging Oil, Combustion Chamber Cleaner, all Yamalube products both 4M and 2M even Yamaha oil change kits. Bulk Yamalube, just bring in your container and save! We stock Honda fuel stabilizer- one quart treats 320 gallons of fuel- an excellent solution to the problems created by ethanol. Other fuel stabilizers like PRI-G and K-100. BG fuel products like 44K. Gear case lube from Yamaha, BRP, Honda and Mercury, even gear lube pumps for the do-it yourselfer.

Hope to see you in the store! Don’t forget the outside of your engine and boat either. We carry a wide variety of cleaners and protectants. Products like YAMASHIELD and Instant Detailer. For the best exterior protection we offer shrink wrapping.

Call at 804-776-6365 for details!

Introducing tough aluminum Alweld Boats!

posted by

Categories: Announcements, New boats

Comments: 0

 Brown’s Marine has added a new boat line, Alweld Boats, to our powerboat range. Alweld Boats was founded in 1979 by Joe and Farrell Beck. Since then, they’ve been guided by the principle: “NEVER ALLOW THE COMPROMISE OF QUALITY FOR QUANTITY”, and today they build some of the toughest aluminum boats on the market.

 2016 ALWELD 1648 VV MARSH CCAlweld Boats is still family owned and in it’s second generation of leadership. That guiding principle, and the original philosophy of boat building are still there: “Better than it needs to be” is their company slogan. In 35 years of business they’ve been true to that principle and it’s reflected in the loyalty of their customers, and the boats that they’ve used for years.

 With several options available, Brown’s Marine can help customers customize these well-respected boats to best suit your needs. Alweld Boats offers many different models and configurations that include: Jon boats in both Flat and Vee bottoms, Marsh series, Crappie Jon models, Stick Steer models, Angler and Bay series. We elected this aluminum manufacturer for their commitment to quality and customer satisfaction. At Brown’s Marine, customer satisfaction is our most important concern.

Repower your boat with confidence

posted by

Categories: Spring Commisioning

Comments: 0

If you’re considering repowering your fishing or pleasure boat this year, Brown’s Marine can help you navigate the process. Repowering is a great way to extend the life of your vessel, but there’s more to consider than just bolting on a new engine or two.

We stand out in this area with a solid reputation as a premier sales and service marine facility. For 33 years, our boating clients have trusted our advice. We offer options to suit specific needs. What’s important to you may differ from what’s important to your neighbor.

Honda OutboardsYou may wonder if changing engine brands is a good idea. We are an authorized sales and service dealership for the top three outboard manufacturers: Yamaha, Honda and Suzuki. By our many years of selling and servicing these manufacturer’s products we have seen both the good and the bad and are able to recommend the right choice for your boat. All three manufacturers are excellent, and all three have their sweet spots, certain horsepower models stand out for each.

We inspect your boat prior to any commitment — and prefer to do this with you present. You might be interested in new controls and instruments or new fuel-system com­ponents—and we can guide you through that too. Understanding every aspect of this important process is key to a perfect repower.

In this industry simply getting a rough estimate over the phone or email is unacceptable and usually results in an unhappy end result. No one wants any surprises. We’re here to help. Call all us at 804-776-6365 to get started.

Batteries – Helpful Hints

posted by

Categories: Uncategorized

Comments: 0

Even when a battery is disconnected and sits for several months, it loses power by self-discharge.

Check voltage: With all the power off and the battery disconnected, check the voltage level. Readings of 12.70 – 12.80 volts or higher mean the battery should be close to or at full charge. If it is below 12.60 volts, it needs to be charged. A battery at 12.75 volts is about 50% and below 12 volts is 100% discharged.

Make sure connections are clean: Your batteries may look good, but oxidation can attack where you can’t see. Anything that comes between your battery’s terminals and your engine’s cables needs to be cleaned off. Baking soda and water work well to neutralize acid. Use distilled water to clean and use a terminal protector spray.

Water level: Skip this step if you have a sealed or absorbed glass mat (AGM) battery. With flooded or wet cell batteries, remove the vent caps and check electrolyte levels. If the level is below the plates, refill with distilled water until the plates are covered – about half inch. Do not overfill – max level is about a quarter inch below the vent well.

Recharge: Make sure the charger you’re using is designed for the type of battery you have. The following chart offers general guidelines:

 

HOW LONG TO CHARGE YOUR BATTERY
Approximate charge time (in hours) for batteries at or below 12.35 Volts.

Rated Charge

Motorcycle

Power Sports

Marine

Small: 8-16 Ah

Large:>16 Ah

1 amp

12-14 hours

24-28 hours

28-32 hours

70-80 hours

2 amps

6-7  hours

12-14 hours

14-16 hours

35-40 hours

5 amps

5-7 hours

6-8 hours

14-18 hours

10 amps

3-4 hours

8-10 hours

15 amps

5-6 hours

Avoid Outboard Corrosion

posted by

Categories: Uncategorized

Comments: 0

As an authorized dealer and service center for Yamaha, Honda and Suzuki outboards, and servicing customers in and around the Chesapeake Bay Region, we deal with our share of corrosion. One thing is for certain; no outboard engine is impervious to corrosion if neglected.  It is very important to do what you can to prevent corrosion from affecting your investment.

severely corroded outboard engine

A severely corroded outboard engine that would not be in this state if the anodes had been replaced regularly.

Some things to be aware of:

Sacrificial Anodes – Most outboards today have sacrificial anodes both external and internal that require inspection and /or replacement. In salt water, especially in cases where the engine cannot be properly flushed with fresh water, these anodes should be checked frequently. In most cases, they’ll need replacing annually. Remember these anodes are in place to protect your engine from corrosion. Once they are gone, the corrosion starts to attack vital components and can become very costly quickly.

Prop Care – Don’t forget the propeller—it should be removed periodically (at least once a season). Check, clean and grease the shaft. Also check for and remove any old fishing line which can cut into prop shaft seals. When a propeller is not removed and its left for years, it is likely it won’t come off.

Spring Commissioning at Browns Marine

It seems everyone is ready for the change of season, most especially boaters. There are many topics to think about as we get ready for warmer weather. In this blog we will discuss some of the more important ones. First let’s talk about gasoline. Fuel distributers will be shifting over to summer blend fuel and stopping delivery of winter blend. For those boaters that have older fuel sitting in their tanks keep in mind that winter blend fuel was formulated for colder temps, running this fuel out as temperatures climb can cause problems. Most of today’s newer more sophisticated engines have ECU’s or ECM’s (electronic control modules/units) that read data fed to them constantly and adjust to try and perform to those inputs. Poor fuel can cause many costly problems and even ruin your engine. Today we must use additives to try and combat the adverse affects on our marine engines. Stop by and we will be glad to discuss the benefits of these products. Products like Ring Free Plus, Internal Engine Cleaner, PRI-G fuel stabilizer, K-100 Fuel Conditioner, Sta-Bil- Honda fuel stabilizer and many more.

Be prepared, as most of our customers are, they understand the importance of preventative maintenance. Most have learned the off-season is the best time to schedule service and any needed repairs. This avoids downtime during the spring/summer season. If you did not winterize – call to schedule service checkups sooner rather than later. The longer you wait the busier we may be. Many customers are already scheduling dewinterizing and bottom painting.Outboard Mechanic

Some important items to keep in mind: water pumps and thermostats are critical to the life of your engine – especially in a saltwater environment. Thermostats should be inspected and/or replaced annually especially in a four stroke. According to most manufacturers today water pumps should be serviced every two to three years (especially in a salt water environment) not just for the components that make up the water pump but also to make sure everything comes apart as it should. We have seen many instances where the lower gear case will not want to separate or the driveshaft key way will not come out due to lack of service. Keeping up with recommended service saves you money in the long run. Also remember simple items like your battery(s). Be sure they are maintained properly and kept charged. If they are suspect, let us load test them for you and make sure they are safe. If you need replacements – remember we stock Interstate Batteries which are fully charged and delivered on a bi-weekly schedule. Speaking of safety – always keep these items on your check list: steering systems – whether mechanical or hydraulic, controls, shift and throttle cables, all fuel and oil hoses, all filters, propeller(s) and don’t forget the trailer. Remember in most cases a trailer equipped with brakes must be inspected annually – in Virginia 3000# gross and over is required to have brakes and therefore needs inspection.

On the sales front we have been busy with new boat orders and customer re-powers. New inventory has been arriving with more to come. Much of this inventory is pre-sold but stock items will be arriving mid-March. For those still looking for that perfect boat or motor please contact us soon. We look forward to seeing all of you for the upcoming season!

Winterization tips and special offers

For many this time of the year is time to winterize and secure the boat until spring. The term winterize is a very general term and can mean many different things depending on the product being considered. For example winterizing an inboard/outboard is different from winterizing an outboard engine and an inboard/outboard that is fresh water cooled is different from one that is raw water cooled. So first learn and understand exactly what you have.

If you are planning to do your own work make sure you know your product. Consult your owners manual, many are now available for download if you do not have a hard copy. If you are unsure, do yourself a favor and take your boat to a reputable service dealer and have it taken care of properly. Some basics to consider:

Protection from freezing- anywhere water can collect is obviously a problem, use common sense –drain freshwater tanks or protect with proper antifreeze, check all compartments and make sure they can drain, when the boat is hauled and blocked or on the trailer remove the drain plug from the boat.

Protect your engine – Inboard/Outboards will freeze, if yours is freshwater cooled make sure the antifreeze is at proper strength, a raw water engine should be flushed and protected with antifreeze or at minimum drained of any water. Outboards should be stored vertically if possible as water will drain from the power head.

Don’t forget your fuel system! We see more fuel related problems than any other issue. Most manufactures today recommend removing fuel from the tank if possible. Even with stabilizer today’s fuels do not have a great shelf life, this is especially true when the fuel sits in small areas like a carburetor. In this environment: small volume, exposure to air and temperature variation fuel will break down rapidly.

We stock winterizing products from Yamaha, Honda, BRP, Suzuki and many aftermarket suppliers. Stop in as many items are on special for the do it yourselfer. Items like Yamaha Ring Free, Yamaha Fogging Oil, Combustion Chamber Cleaner, all Yamalube products both 4M and 2M even Yamaha oil change kits. Bulk Yamalube, just bring in your container and save! We stock Honda fuel stabilizer- one quart treats 320 gallons of fuel- an excellent solution to the problems created by ethanol. Other fuel stabilizers like PRI-G and K-100. BG fuel products like 44K. Gear case lube from Yamaha, BRP, Honda and Mercury, even gearlube pumps for the do-it yourselfer.

Hope to see you in the store!

Thank you to all our loyal customers for their continued support. Special thanks this past month to these great customers: James S. from Richmond with the purchase of a new Twin Vee 19 Bay Cat rigged with a Suzuki 115, Robert H. from Mathews on the purchase of a new Twin Vee 22 Ocean Cat rigged with twin Suzuki 115’s, Ashby and Marsha M. of Gloucester for the purchase of their new All Craft 17 Cayman rigged with a Yamaha F90, Carrie and Ames R. on the Yamaha F70, Mark Weidman on his Honda 2.3, John Collamore for the Honda 2.3, Richard Blankenship on his Load Rite Trailer, John Kanady on his Load Rite Trailer, Louis and Anne Romano on the Yamaha F70, Louis Savedge on the Honda 5, L.G Leslie on the Suzuki DF250, Noel Clinard on the Honda 2.3 Stan H. on the Honda 50 and Tom C. on the Maritime 20 Defiant rigged with a Honda 150.

It’s All About the Package

posted by

Categories: Industry News

Comments: 0

Fuel efficiency, lack of noise and vibration, a strong charging system, power and speed all add up to the perfect boat and motor combination.

 

When it comes to boat ownership, it’s really all about having the right package for what you want to do. The more your boat, engines and all the components work together, the more effectively you can fish and operate, and the better performance and fuel economy you’ll get. Essentially, that all equates to happiness.

I was just at the Yamaha V6 F300 Demo Tour in Seabrook, Texas, and that was one of the things we were emphasizing—having everything working together to optimize performance for your style of fishing. And from the start, let me state that the Yamaha F300’s really are the best outboards on the market when it comes to performance, providing a broader performance band of midrange fuel efficiency and power than any other outboard on the market.

They’re also the best when combined with OEM partners. When you combine three F300’s with my boat—a 36’ Yellowfin, it really is the optimum package for performance, speed, reliability, efficiency and fuel economy. And when you combine that with my type of fishing, which is very versatile where I’m fishing for Spanish mackerel on the beach one day, snook fishing in the inlet another and running 200 miles to chase tournament fish on another, you get the best fuel economy, so essentially the best of both worlds.

We need and expect a lot from out boat and motor, and this package has it all. When Spanish mackerel fishing, we need maneuverability so we can turn quickly in a pack of boats or to avoid an approaching wave on the beach that might break at any time. When we’re snook fishing the engines are running and keeping us in place in a moving tide and we need those engines to be super quiet, with no noise when we’re constantly shifting in and out of gear to hold position in a strong current.

That’s where the combination of the motors and the SDS (Shift Dampener System) props come together to create the perfect package for what we want to do. There’s no sound whatsoever when you put the engines in and out of gear, so you don’t spook the fish and shut the bite down.

Then there are the days when we’re a mile offshore catching Sardines and a 50-pound king comes through. I’ll have the “Oh My God There’s A 50-pound King In The Bait School” rod ready to go, and we just put a bait on and toss it back, and that can make your day right there. Here I am in a 12,000 pound, 900 horsepower boat having a full-day charter on less than 15 gallons of fuel.

When I run my normal charters out of Jupiter, Florida, I’m running less than 30 miles in any direction and averaging 1.2 or 1.3 miles per gallon, which is pretty impressive for a 36’ boat.

picture of Yamaha Next Generation of V6 4.2L Offshore outboardThe beauty incredible midrange fuel efficiency of the F300’s is exhibited in the springtime when we’re doing a lot of run and gun dolphin fishing. It sounds like you run fast all over the place, but we really don’t. My boat gets on plane at 23mph, and that’s what we run. We run for no more than five minutes, then we shut down and scan the horizon 360 degrees with binoculars looking for floating objects that might hold dolphin. If we don’t see anything, we run for five minutes more, and then stop and look again. And we don’t run in the same direction, we zig-zag our course to cover the most water possible. The key to that is that at 23 mph or just on plane, I can get 1.5 miles per gallon.

When you have that kind of fuel economy, it’s actually cheaper for me to run the boat to some of the nearby tournaments than to trailer it. There’s a big tournament coming up at Hillsborough Inlet in a couple of weeks and I’ll probably put the boat in locally and run the 36 miles down instead of trailering it down.

So not only am I being cost efficient and fuel efficient, but I’m being fish smart too. I can zig-zag from 60 feet out to 300 feet of water and see what the conditions are and compare that information with what I know about the bite to get the most current fishing update I can have.

We did a little daytime swordfishing about 18 miles east of the inlet last week for something different. We made six drops, had four bites and caught two fish. Doing something like that is when the charging systems on these engines comes into play.

 

We have two electric reels going, plus all our electronics, radar, sounder, bait pumps, and everything else going. We also put up our kits and put a big bait out, because you never know when that big dolphin is going to swim by, and we use electric reels on the kites. So we have all this power drain at once, and that’s where you realize that the charging system is better than it’s ever been on these motors, something like 29% better than any other V6 outboard on the market.

I’ve never had an issue where I’m tripping breakers or with a low battery. These motors require very little power at idle. They’re just very efficient.

The same goes when we transition to the evening swordfishing where we’re out there at night. We use strong lights to light up the fishing area, all the electronics and radar. They’re always on watch for us, and yet we have plenty of power to keep thing going all night long.

So whether I’m fishing the inlets, the beaches, running and gunning, swordfishing or tournament fishing, I have the perfect boat and motor combination, along with all the other components to the system to give me the best chance to catch fish with optimum performance and incredible fuel economy. How many boat/motor manufacturers can make that statement?

By George Mitchell

Yamaha Pro Staff

 

Yamaha’s F350 story Video

Brown's Marine launches new website

posted by

Categories: Announcements

Comments: 1

example of contact form image

Easily accessible contact form

We have redesigned our website from top to bottom to make it easier for our customers to use and to reflect our continued commitment to quality service. Our new website will help us work even more effectively to achieve our ultimate goal of providing excellent service.

With the help of Brass Tacks Marine, a creative website design and advertising agency specializing in marine industry, we’ve launched a fully updated site. The Brown’s Marine site features new functionality, a news blog, and a simple, intuitive design that makes it easier for customers to find the information they need about our products and services.

New features of the website include:

  • Powerful search tool that indexes the entire site
  • Tagged, easy-to-browse pages and posts
  • Embedded photo and video galleries of our products and services
  • Latest news articles on the products we sell.
  • Local announcements
  • Extensive service and parts information
  • Details about our product lines
directions example image

access to directions to our facility from our homepage

We invite you to return to our site often to read the latest news information from Brown’s Marine, and more, to see our latest pre-owned boat listings, and to get up to the minute weather information and more.

Even though our website has changed, Brown’s Marine is still in the same location and continues to serve the Deltaville and mid-Chesapeake Bay area. You deserve the best and service is our top priority here at Brown’s Marine. Call us at 804-776-6365 or contact us online with any questions you might have.